Evergreen 57 FujiXWeekly Case
– Designed in collaboration with Fuji X Weekly, this case was created to provide the ultimate protection for the Fujifilm X100 series. Photographers demand top-tier lockable protection – it’s dustproof, watertight, and shock-resistant – ensuring gear stays safe no matter where you go. The 100% high-impact polycarbonate construction is precision designed in Southern California and tested to last.
– As part of this collab, this case comes with a unique Evergreen x Fuji X Weekly Film Recipe. Specially designed to bring out the best in your Fujifilm X100 series camera, this recipe will help capture stunning, film-like images directly in-camera.
– Made of Cross-Linked foam for superior protection, the insert is tailored to fit Fujifilm X100V, X100F, X100T, X100S, or X100 cameras, along with dedicated slots for a battery, an additional SD card, and accommodates two minimal lens mods filters. The removable lid foam adds flexibility, allowing reconfiguration to suit your needs. (Note: insert is NOT compatible with larger mods such as square lens hoods or wide-angle adapters)
– A unique line feature, TwistLock creates the Flip Latch Pressure Equalization System allowing for stable pressure, waterproof security, prevents accidental opening, and the ability to key lock the case. The 3-Step TwistLock Latch provides 3 levels of security. Step 1 – WATERPROOF Latch firmly secures the o-ring. Step 2 – TwistLock Latch (turn by hand to secure). Step 3 – Keyed Protection uses the key to turn the TwistLock further keeping others out!
– Virtually indestructible, it’s built to withstand everyday use so you stay worry-free knowing gear is safe. This case has been rigorously tested and proven to be IP67 Waterproof, in addition to being crushproof and travel ready.
– Now you can personalize text in two locations on the case, with multiple font options for names, initials, labels, or any desired text! Our cases are high quality and built to last, and so is any customization. We only use long-lasting, durable, waterproof and virtually scratch proof UV printing to achieve all of our unique or personalized options. UV printing allows instant curing and drying, providing for more vibrant colors, a smooth finish, and holds up over time.
– All Evergreen Cases are USA Made and come with a lifetime warranty against any manufacturing defects.
– Exterior: 9.5" x 5.8" x 3.8" Interior: 8.2" x 4.2" x 3.3" Weight: 2.31 lbs
Exterior: 9.5" x 5.8" x 2.8"
Interior: 8.4" x 4.4" x 2.3"
Buoyancy: 3 lbs
Weight Capacity: 10 lbs
Weight: 1.31 lb
Specs
- ATA 300 / TSA Compliant
- Made to MIL-STD 810F Standards
- IP67 Waterproof
- Origin: United States
- Materials: Polycarbonate
Features
- Secure Storage for GoPro
- Custom Cut Foam with Additional Space for Max Lens Mod, 3 Batteries, and 2 Mounting Screws
- Accessory Compartment Accommodates Chargers, Extra Mounts, Tools etc.
- Bonus SD Card Slot for Memory Card
- Crushproof, Impact Resistant, Rust Proof, Adventure-Proof
- Keyed TwistLock Latch with Flip Latch Pressure Equalization System
Prop 65 WARNING
This product contains the chemical Bisphenol A (BPA) which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more info visit www.P65Warnings.ca.gov
All Evergreen Cases are covered with a Lifetime Manufacturer Warranty against defects in material and craftsmanship.
Picture by Ritchie Roesch
SOOC with evergreen x FUJI X WEEKLY recipe
Exclusive SOOC Recipe
In Partnering with Fuji X Weekly, we developed a Portra style film recipe that we’ll send with every purchase.
Premium Insert
Equipped with a resilient cross-linked PE insert, ensuring superior protection.
Key Lock Latch
Three levels of security: Click, Twist, Key
Add Custom Text
Customize your case to reflect your personal style and preferences. Own your adventure!
Frequently Asked Questions
-
Depending on your insert, the case will have either a full rubber boot or a thin liner gasket that creates a watertight seal between the top and bottom of the case. The front of the case has an o-ring next to the locking mechanism that creates a watertight seal that allows for a small amount of air to pass through and equalize pressure between the inside and outside of the case to account for atmospheric pressure variance.
-
There are a couple of factors that can make the boxes a little tricky to open upon arrival. First, please verify that the bar on the locking mechanism is turned vertically - you can use your hand to twist it counter-clockwise. Secondly, Please be aware that the latching assembly is a single piece that covers almost the entire width of the front of the case. It can certainly be a little confusing if you're not used to it. Thirdly, atmospheric pressure changes between our warehouse, in transit, and the final destination can create a vacuum seal effect. The first time you open the case, can require a little more effort to pry the latch mechanism up and "pop" this seal. Please give these steps a try, or see the instructional video linked here for further assistance: https://www.youtube.com/watch?v=55_U5hSIsns
-
All Evergreen cases and inserts are designed and manufactured in the United States using globally sourced materials.
-
Our Micro EDC cases have a three-stage locking system: First, the hinge itself snaps closed. engaging the front hinge in this way makes the case waterproof. Secondly, you can twist the lock clockwise to engage it, preventing the case from opening accidentally. Finally, the key can be used to turn the locking mechanism an additional 90 degrees and prevent it from being opened by twisting the thumb+finger dial.
